How to correctly replace the engine oil of Weifang diesel generator set? This question may confuse many users. Huaquan Electric will share with you the tips for replacing diesel generators.
1. Place the diesel generator set on a flat surface and start the engine for a few minutes to increase its oil temperature before stopping the engine.
2. Remove the oil level gauge bolt (i.e. oil dipstick).
3. Place an oil pan under the engine, remove the drain screw, and the engine oil can be discharged from the crankcase.
4. Check the oil drain screws, sealing rings, and rubber bands. If they are damaged, please replace them immediately.
5. Reinstall the oil screw and tighten it.
6. Lower the engine oil to the upper position of the oil dipstick mesh grid.
be careful:
1. The generator set should have its oil replaced immediately after 20 hours (or one month) of initial use
2. After every 1000 hours (or 6 months) of use, the oil must be changed. (In harsh environments, it is necessary to increase the number of times to use clean engine oil with viscosity SAE10W30, API grade SG, SH, SJ or higher)
I believe that through the above explanation, you have understood the oil change techniques for Weifang diesel generator sets. Huaquan Power is a professional generator manufacturer, welcome to discuss cooperation.
